Page Comparison

10

Configured Service Type Lower Than Effective (SD/HD/RADIO)

Config Service Type Mismatch

HD service detected while defined as SD (or SD instead of radio).

17

PSI CRC Error

CRC Error

PSI CRC error other than PAT, PMT, EIT, NIT, TDT detected on the table. It is triggered every time there is a CRC error on any of the tables.

181

Embedded Teletext Clock Error

Teletext Error

The embedded Teletext clock stopped.

Teletext pages usually have a clock in the corner that is pushed by the Teletext generator and the updating of the pages. Disconnecting the Teletext generator from the encoder causes everything on the Teletext side to be stuck.

183

Non-Freezed Frame

Non-Freeze

This event is triggered when a non-freezed frame is detected where a freezed frame is expected.

256

Monitor Nielsen ID3 data

Nielsen ID3 received

This event is triggered if the information received is out of the OTT content or the transport stream on an additional PID. Only the content is taken and sent as extra data.

257

Monitor private ID3 data

Private ID3 received

This event is triggered if the information received is out of the OTT content or the transport stream on an additional PID. Only the content is taken and sent as extra data.

370

Timecode content error - either jumping or stopped

TimeCode Error

This event is triggered if the timecode is jumping or stopped. Jumping is going backward, and not incrementing and stopped is being stuck. A text caption specifies if it's jumping or stopped. It applies for timecode in both compressed and uncompressed content.

371

Timecode Missing

TimeCode Missing

This Event is triggered if there is no timecode for both types, jumping or stopped.

380

Teletext GPI-1

GPI 1

It is a standard that specifies how to send GPI-1 triggers on a Teletext content. Every time this event occurs, an alarm is triggered.

381

Teletext GPI-2

GPI 2

It is a standard that specifies how to send GPI-2 triggers on a Teletext content. Every time this event occurs, an alarm is triggered.

382

Teletext GPI-3

GPI 3

It is a standard that specifies how to send GPI-3 triggers on a Teletext content. Every time this event occurs, an alarm is triggered.

383

Teletext GPI-4

GPI 4

It is a standard that specifies how to send GPI-4 triggers on a Teletext content. Every time this event occurs, an alarm is triggered.

384

Teletext GPI-5

GPI 5

It is a standard that specifies how to send GPI-5 triggers on a Teletext content. Every time this event occurs, an alarm is triggered.

385

Teletext GPI-6

GPI 6

It is a standard that specifies how to send GPI-6 triggers on a Teletext content. Every time this event occurs, an alarm is triggered.

386

Teletext GPI-7

GPI 7

It is a standard that specifies how to send GPI-7 triggers on a Teletext content. Every time this event occurs, an alarm is triggered.

387

Teletext GPI-8

GPI 8

It is a standard that specifies how to send GPI-8 triggers on a Teletext content. Every time this event occurs, an alarm is triggered.

388

Teletext GPI state change

GPI Change

This event is triggered if any of the Teletext GPI events (1-8) are changed.

389

Teletext GPI Missing

GPI Missing

This event is triggered if any of the Teletext GPI events (1-8) doesn't exist.

999

Activated by User Snooze

Snooze

Snooze is activated by the user.
Snooze disables the event for some time, and the snooze message on the mosaic is displayed.