Page Comparison

231

UDP/RTP Protocol Mismatch - expected vs actual

UDP/RTP Protocol Mismatch

When scanning/adding a channel, the input for the transport protocol is set either as RTP or UDP, this event is triggered if the transport protocol is different from the configured.

300

Packet loss - detected by RTP sequence number on any source

RTP Packet loss

Packet loss is based on the RTP sequence counter. This event is triggered when there is a packet loss in any source.

301

Packet loss - detected by RTP sequence number on main source

RTP Packet loss (A)

This event is triggered when there is a packet loss in the main source.

302

Packet loss - detected by RTP sequence number on second source

RTP Packet loss (B)

This event is triggered when there is a packet loss in the secondary source.

303

Source is down (one or both of the 2022-7 sources are down – Video/Audio/Anc)

2022-7 Link Down

This event is a combination of multiple events. It is triggered if the main or secondary content is down.

304

Main Video Flow, High inter-arrival time max value (IAT above threshold)

IAT-max (A)

IAT is the time measured between consecutive packets of the same flow. The time difference between each packet should be constant. If not, the IAT creates a burst on the network, causing the network overloading. If the time difference is greater than configured in the threshold, this event is triggered.

305

Second Video Flow, High inter-arrival time max value (IAT above threshold)

IAT-max (B)

IAT is the time measured between consecutive packets of the same flow. The time difference between each packet should be constant. If not, the IAT creates a burst on the network, causing the network line's overloading. If the time difference is greater than configured in the threshold, and there are multiple flows in this network line, this event is triggered.

306

Audio checksum error

Audio Checksum Error

The checksum error is for AES audio under 2022-6. This event is triggered if the checksum is wrong.

307

Video Flow RTP-PTP offset

Video RTP-PTP Offset

The difference between the PTP clock and the clock value on the RTP headers are measured. This event is triggered if the value is above the configured threshold.

308

Frame alignment to PTP

Misalignment to PTP

This event is valid for 2110-20 and 2022.
It is triggered when frame misalignment is above the configured threshold.
This event is not affected by the RTP timestamp value.

309

Wrong RTP 2110 Video Payload type

RTP Video Payload error

This event is triggered when the payload type in the RTP header differs from the expected value in the channel configuration.

310

Audio Flow RTP-PTP offset (2110-30/31)

Audio RTP-PTP Offset

Measuring the difference between the PTP clock and the clock value on the RTP headers should be completely aligned. If not, this event is triggered if the value is above the configured threshold.

311

Ancillary Flow RTP-PTP offset (2110-40)

ANC RTP-PTP Offset

Measuring the difference between the PTP clock and the clock value on the RTP headers should be completely aligned. If not, this event is triggered if the value is above the configured threshold.

312

Main Audio Flow, High inter-arrival time max value (IAT above threshold)

Audio IAT-max (A)

Triggers an event for a measured IAT value above the Max configured value.

313

Second Audio Flow, High inter-arrival time max value (IAT above threshold)

Audio IAT-max (B)

Triggers an event for a measured IAT value above the Max configured value.

314

Main Ancillary Flow, High inter-arrival time max value (IAT above threshold)

ANC IAT-max (A)

Triggers an event for a measured IAT value above the Max configured value.

315

Second Ancillary Flow, High inter-arrival time max value (IAT above threshold)

ANC IAT-max (B)

Triggers an event for a measured IAT value above the Max configured value. Triggers an event for a measured IAT value above the Max configured value.

316

Video Source is down (one or both of the 2022-7 sources are down)

Video Link Down

This event is valid only for sources over RTP.
It is triggered when the video flow is not active, either one or both. The extra information describes the missing path. (A, B, A+B)

317

Audio Source is down (one or both of the 2022-7 sources are down)

Audio Link Down

This event is valid only for 2110 sources over RTP.
It is triggered when the video flow is not active, either one or both. The extra information describes the missing path. (A, B, A+B)

318

Ancillary Source is down (one or both of the 2022-7 sources are down)

Ancillary Link Down

This event is valid only for 2110 sources over RTP.
It is triggered when the video flow is not active, either one or both. The extra information describes the missing path. (A, B, A+B)

322

Wrong RTP 2110 audio Payload type

RTP Audio Payload error

Triggered when the payload type in the RTP header differs from the expected value in the channel configuration.

323

Wrong RTP 2110 ancillary Payload type

RTP ANC Payload error

Triggered when the payload type in the RTP header differs from the expected value in the channel configuration.