| ID | Name | Event Error | Description |
11 | PMT Is Scrambled | PMT Scrambled | The packet header scrambling flag is marked as scrambled – for the PMT table. The PMT table is not supposed to be scrambled. If the scrambling flag on the PMT table is set to on, it triggers an alarm. |
12 | PMT Not Found | PMT Not Found | PMT, not found; either PID is missing, or the table was not found in the PID. |
13 | PMT Repetition Rate Too Slow | PMT Repetition Too Slow | PMT repetition rate is too slow; the threshold is configurable. The default value is 0.5 sec.; an alarm is triggered when the threshold is less than the PMT repetition rate. |
15 | Referred PID not Found (zero bitrate PID) | Zero BR PID | If the PID described on the PMT table does not exist on the Transport Stream (zero bitrate PID), this event is triggered. |
25 | PCR PID Mismatch | PCR not on the expected PID | If the actual PCR PID discovered during the scan does not match the PMT table information, this event is triggered. |
57 | PMT CRC Change(Monitor changes to PMT CRC) | PMT CRC Changed | The CRC for the PMT table changed without version change of the PMT Table. |
65 | PMT Version Change | PMT Version Changed | The PMT version was changed. Whenever the content of the PMT table changes, the CRC of the table changes as well, and the version number of the table is incremented. This event is not an error. |
67 | PMT Table ID Error | PMT table ID Error | The PMT table ID field is not correct. This event is triggered if a wrong table ID is received for PMT PID. |
76 | PMT Is Illegal | PMT Illegal | Illegal values or length on PMT. This event is triggered if the structure of the PMT is illegal. For example, certain forbidden markers on the header are present. |
88 | PMT Bitrate, Max Threshold | PMT Bitrate above Max | Detected PMT bitrate is greater than the configured maximum threshold. |
89 | PMT Bitrate, Min Threshold | PMT Bitrate below Min | Detected PMT bitrate is smaller than the configured minimum threshold. |
92 | Missing PIDs on PMT | Missing PID | PIDs that are configured in the channel configuration is not found in the PMT table. |
93 | Extra PIDs on PMT | Extra PIDs on the PMT table | The PMT table refers to PIDs which were not configured in the channel configuration. |
142 | Multiple PID Entries on PMT | PMT Multi PID | The PMT table includes more than one definition for the same PID. |
144 | Payload changed | PID payload changed on PMT (or Descriptor error) | The PID payload type does not match the configuration. |
198 | PMT Components Descriptors Error | PMT Descriptors Error | The component description does not match the content type. |
199 | Multiple Component Descriptors on PMT | PMT Multi Descriptors | Multiple definitions for the same descriptor PID. For example, PID 2001 is defined for English subtitles descriptors as well as Spanish. |
...