Configuration Backup
Although the system configuration will not change upon the license upgradeupdate, it is mandatory to create a backup file of the configuration by exportingthe complete configuration before the license upgradeupdate.
Download Latest Files
Login to TagVS Support Center and download the latest license file "License_vxxxx.rar".
Upload Software to Device
Online
...
update through GUI
For MCM-9000, version 5.1.2 onwards, follow the below steps to upload the device's latest files through the GUI.
...
After the download, navigate to System → System Information → Software Management → Upload License File (at the bottom).
Click on “Upload File” in the below screen to upload the downloaded RAR files (license) and then click on Submit to finish the upload.
...
Online
...
update through FTP
Please follow the below steps to upload the latest files to the MCM-9000 through FTP. This procedure was tested with command-line FTP and FileZilla FTP client.
Extract the .rar file.
Navigate to the location of the downloaded files (software and firmware) through the CLI (command line "cd c:\location\").
Connect to the device by "ftp <ip address of device>" with the user name "license" and password "tagvs" for License upgradesupdates.
Upload the license upgrade update file to the default folder on the MCM-9000 device using the CLI (in the FTP's command line type: "put {Enter the Path to the file}").
...
Commands | Description |
cd c:\location\ | Change to the location of the new software file. |
ftp 192.168.0.111 | Connect to the IP of the running system. |
license | Enter the connection username. |
tagvs | Enter the connection password. |
put license.tag | Push the new software file. |
quit | Disconnect. |
Offline
...
Update
Follow the below steps to perform an offline upgradeupdate:
Power down the unit, disconnect the flash drive from the server.
Connect the flash drive to a Windows/Linux PC.
Extract the .rar file.
Replace the "license.tag" file under "license" folder with the new file.
Reconnect the flash drive to the server.
Power up the server.
Soft Reset after
...
update
Please make sure to do a “Soft reset“ under System → System Information → Device Controls after upgrade update for the changes to reflect.
...