Page Comparison

251

SCTE-35 OutOfNetwork signal - In

SCTE-35 In

A 1-bit flag that, when set to '1', indicates that the splice event is an opportunity to exit from the network feed and that the value of splice_time(), as modified by pts_adjustment, shall refer to an intended Out Point or Program Out Point. When set to '0', the flag indicates that the splice event is an opportunity to return to the network feed and that the value of splice_time(), as modified by pts_adjustment, shall refer to an intended In Point or Program In Point.

252

SCTE-35 OutOfNetwork signal - Out

SCTE-35 Out

A 1-bit flag that, when set to '1', indicates that the splice event is an opportunity to exit from the network feed and that the value of splice_time(), as modified by pts_adjustment, shall refer to an intended Out Point or Program Out Point. When set to '0', the flag indicates that the splice event is an opportunity to return to the network feed and that the value of splice_time(), as modified by pts_adjustment, shall refer to an intended In Point or Program In Point.

259

Report SCTE-35 splice insert/time PTS out of selected window

SCTE-35 splice PTS out of range

A splice point is a place where the content needs to be changed. The SCTE splice point specifies the in and out of a transition in a commercial. It also includes the actual starting point of a commercial.

260

Content Identification (Seg 0x01)

SCTE-35, Content Identification

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

261

Program Start (Seg 0x10)

SCTE-35, Program Start

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

262

Program End (Seg 0x11)

SCTE-35, Program End

The Event is triggered on the SCTE-35 signal ID, as defined in the protocol.

263

Program Early Termination (Seg 0x12)

SCTE-35, Early Term

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

264

Program Breakway (Seg 0x13)

SCTE-35, Breakway

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

265

Program Resumption (Seg 0x14)

SCTE-35, Resume

The Event is triggered on the SCTE-35 signal ID, as defined in the protocol.

266

Program Runover Planned (Seg 0x15)

SCTE-35, Runover Planned

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

267

Program Runover Unplanned (Seg 0x16)

SCTE-35, Runover Unplanned

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

268

Program Overlap Start (Seg 0x17)

SCTE-35, Overlap

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

269

Program Blackout Override (Seg 0x18)

SCTE-35, Blackout

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

270

Chapter Start (Seg 0x20)

CTE-35, Chapter Start

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

271

Chapter End (Seg 0x21)

SCTE-35, Chapter End

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

272

Provider Advertisement Start (Seg 0x30)

SCTE-35, Provider Ad Start

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

273

Provider Advertisement End (Seg 0x31)

SCTE-35, Provider Ad End

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

274

Distributor Advertisement Start (Seg 0x32)

SCTE-35, Dist Ad Start

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

275

Distributor Advertisement End (Seg 0x33)

SCTE-35, Dist Ad End

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

276

Placement Opportunity Start (Seg 0x34)

SCTE-35, Placement Start

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

277

Placement Opportunity End (Seg 0x35)

SCTE-35, Placement End

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

278

Unscheduled Event Start (Seg 0x40)

SCTE-35, Event Start

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

279

Unscheduled Event End (Seg 0x41)

SCTE-35, Event End

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

280

Network Start (Seg 0x50)

SCTE-35, Network Start

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

281

Network End (Seg 0x51)

SCTE-35, Network End

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

282

Delivery Not Restricted

SCTE-35, Delivery Not Restricted

Part of the SCTE message that defines the behavior of the content.

283

Web Delivery Allowed

SCTE-35, Web Delivery Allowed

Web Delivery Allowed flag to indicate if the broadcast advertisements should be blacked out.

284

No Regional Blackout

SCTE-35, No Regional Blackout

Channels specific to certain regions should not be transmitted. It also specifies the type of content that needs to be a blackout.

285

Archive Allowed

SCTE-35, Archive Allowed

Part of the SCTE message that defines the behavior of the content.

286

No Device Restriction

SCTE-35, No Device Restrictions

This field signals three predefined groups of devices. The population of each group is independent, and the groups are non-hierarchical. The delivery and format of the messaging to define the devices contained in the groups are out of the scope of this standard.

287

Distributer Placement Opportunity Start (Seg 0x36)

SCTE-35, Dist-Plac Start

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

288

Distributer Placement Opportunity End (Seg 0x37)

SCTE-35, Dist-Plac End

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

289

Break Start (Seg 0x22)

SCTE-35, Break Start

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

290

Break End (Seg 0x22)

SCTE-35, Break End

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

291

Log SpliceInsert Flags

SCTE-35, SpliceInsert

This is a legacy construct indicating where the local affiliate breaks occur.

292

Log SpliceSchedule Flags

SCTE-35, SpliceSchedule

This is a legacy construct that allows a schedule of splice events to be conveyed in advance.

293

Report SCTE-35 splice insert without Hint Message

SCTE-35 without HINT

There is a hint message before the window for the commercial. No time window is present since there is a hint message before the SCTE trigger.

294

Report Hint Message without SCTE-35 in the selected time window

Hint without SCTE-35

There is a hint message in a selected time window but no SCTE trigger.

295

Report SCTE-35 splice insert without splice marker in the selected time window

SCTE-35 splice without marker

There is an SCTE splice message in a selected time window but no splice marker in the video.

296

Report duration between Hint Message and splice trigger below selected time window

Hint too late

If the hint message and the splice trigger together take more than the configured time, this event is triggered.

297

Report duration between SCTE-35 splice insert Message and splice trigger below selected time window

SCTE-35 splice too late

If the time between the trigger and the splice is not sufficient, this event is triggered.

298

Report splice trigger without SCTE-35 splice insert

splice marker without SCTE-35

If a marker in the content is without the SCTE message, this event is triggered.

299

Report Hint-SCTE-35-Trigger set

Hint-SCTE-35-Trigger

This event is triggered when a hint message is set.

330

Opening Credit Start (Seg 0x24)

SCTE-35, Opening Credit Start

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

331

Opening Credit End (Seg 0x25)

SCTE-35, Opening Credit End

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

332

Closing Credit Start (Seg 0x26)

SCTE-35, Closing Credit Start

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.

333

Closing Credit End (Seg 0x27)

SCTE-35, Closing Credit End

The event is triggered on the SCTE-35 signal ID, as defined in the protocol.