SCTE-35 A is a protocol used to signal all kinds of program and ad insertion events in linear transport streams and newer OTT delivery formats such as HLS and DASH. It is used to get alerts when a message is received.
Version 6.0 onwards MCM9000 provides additional events 500 -to 513 SCTE-35 A messages.
| ID | Name | Event Error | Description |
251 | SCTE-35 OutOfNetwork signal - In | SCTE-35 In | A 1-bit flag that, when set to '1', indicates that the splice event is an opportunity to exit from the network feed and that the value of splice_time(), as modified by pts_adjustment, shall refer to an intended Out Point or Program Out Point. When set to '0', the flag indicates that the splice event is an opportunity to return to the network feed and that the value of splice_time(), as modified by pts_adjustment, shall refer to an intended In Point or Program In Point. |
252 | SCTE-35 OutOfNetwork signal - Out | SCTE-35 Out | A 1-bit flag that, when set to '1', indicates that the splice event is an opportunity to exit from the network feed and that the value of splice_time(), as modified by pts_adjustment, shall refer to an intended Out Point or Program Out Point. When set to '0', the flag indicates that the splice event is an opportunity to return to the network feed and that the value of splice_time(), as modified by pts_adjustment, shall refer to an intended In Point or Program In Point. |
259 | Report SCTE-35 splice insert/time PTS out of selected window | SCTE-35 splice PTS out of range | A splice point is a place where the content needs to be changed. The SCTE splice point specifies the in and out of a transition in a commercial. It also includes the actual starting point of a commercial. |
260 | Content Identification (Seg 0x01) | SCTE-35, Content Identification | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
261 | Program Start (Seg 0x10) | SCTE-35, Program Start | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
262 | Program End (Seg 0x11) | SCTE-35, Program End | The Event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
263 | Program Early Termination (Seg 0x12) | SCTE-35, Early Term | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
264 | Program Breakway (Seg 0x13) | SCTE-35, Breakway | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
265 | Program Resumption (Seg 0x14) | SCTE-35, Resume | The Event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
266 | Program Runover Planned (Seg 0x15) | SCTE-35, Runover Planned | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
267 | Program Runover Unplanned (Seg 0x16) | SCTE-35, Runover Unplanned | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
268 | Program Overlap Start (Seg 0x17) | SCTE-35, Overlap | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
269 | Program Blackout Override (Seg 0x18) | SCTE-35, Blackout | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
270 | Chapter Start (Seg 0x20) | CTE-35, Chapter Start | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
271 | Chapter End (Seg 0x21) | SCTE-35, Chapter End | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
272 | Provider Advertisement Start (Seg 0x30) | SCTE-35, Provider Ad Start | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
273 | Provider Advertisement End (Seg 0x31) | SCTE-35, Provider Ad End | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
274 | Distributor Advertisement Start (Seg 0x32) | SCTE-35, Dist Ad Start | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
275 | Distributor Advertisement End (Seg 0x33) | SCTE-35, Dist Ad End | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
276 | Placement Opportunity Start (Seg 0x34) | SCTE-35, Placement Start | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
277 | Placement Opportunity End (Seg 0x35) | SCTE-35, Placement End | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
278 | Unscheduled Event Start (Seg 0x40) | SCTE-35, Event Start | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
279 | Unscheduled Event End (Seg 0x41) | SCTE-35, Event End | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
280 | Network Start (Seg 0x50) | SCTE-35, Network Start | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
281 | Network End (Seg 0x51) | SCTE-35, Network End | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
282 | Delivery Not Restricted | SCTE-35, Delivery Not Restricted | Part of the SCTE message that defines the behavior of the content. |
283 | Web Delivery Allowed | SCTE-35, Web Delivery Allowed | Web Delivery Allowed flag to indicate if the broadcast advertisements should be blacked out. |
284 | No Regional Blackout | SCTE-35, No Regional Blackout | Channels specific to certain regions should not be transmitted. It also specifies the type of content that needs to be a blackout. |
285 | Archive Allowed | SCTE-35, Archive Allowed | Part of the SCTE message that defines the behavior of the content. |
286 | No Device Restriction | SCTE-35, No Device Restrictions | This field signals three predefined groups of devices. The population of each group is independent, and the groups are non-hierarchical. The delivery and format of the messaging to define the devices contained in the groups are out of the scope of this standard. |
287 | Distributer Placement Opportunity Start (Seg 0x36) | SCTE-35, Dist-Plac Start | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
288 | Distributer Placement Opportunity End (Seg 0x37) | SCTE-35, Dist-Plac End | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
289 | Break Start (Seg 0x22) | SCTE-35, Break Start | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
290 | Break End (Seg 0x22) | SCTE-35, Break End | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
291 | Log SpliceInsert Flags | SCTE-35, SpliceInsert | This is a legacy construct indicating where the local affiliate breaks occur. |
292 | Log SpliceSchedule Flags | SCTE-35, SpliceSchedule | This is a legacy construct that allows a schedule of splice events to be conveyed in advance. |
293 | Report SCTE-35 splice insert without Hint Message | SCTE-35 without HINT | There is a hint message before the window for the commercial. No time window is present since there is a hint message before the SCTE trigger. |
294 | Report Hint Message without SCTE-35 in the selected time window | Hint without SCTE-35 | There is a hint message in a selected time window but no SCTE trigger. |
295 | Report SCTE-35 splice insert without splice marker in the selected time window | SCTE-35 splice without marker | There is an SCTE splice message in a selected time window but no splice marker in the video. |
296 | Report duration between Hint Message and splice trigger below selected time window | Hint too late | If the hint message and the splice trigger together take more than the configured time, this event is triggered. |
297 | Report duration between SCTE-35 splice insert Message and splice trigger below selected time window | SCTE-35 splice too late | If the time between the trigger and the splice is not sufficient, this event is triggered. |
298 | Report splice trigger without SCTE-35 splice insert | splice marker without SCTE-35 | If a marker in the content is without the SCTE message, this event is triggered. |
299 | Report Hint-SCTE-35-Trigger set | Hint-SCTE-35-Trigger | This event is triggered when a hint message is set. |
330 | Opening Credit Start (Seg 0x24) | SCTE-35, Opening Credit Start | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
331 | Opening Credit End (Seg 0x25) | SCTE-35, Opening Credit End | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
332 | Closing Credit Start (Seg 0x26) | SCTE-35, Closing Credit Start | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
333 | Closing Credit End (Seg 0x27) | SCTE-35, Closing Credit End | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
| 500 | Provider Overlay Placement Opportunity Start (Seg 0x38) | SCTE-35, Provider Overlay Start | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
| 501 | Provider Overlay Placement Opportunity End (Seg 0x39) | SCTE-35, Provider Overlay End | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
| 502 | Distributor OverlayPlacement Opportunity Start (Seg 0x3A) | SCTE-35, Dist Overlay Start | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
| 503 | Distributor Overlay Placement Opportunity End (Seg 0x3B) | SCTE-35, Dist Overlay End | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
| 504 | Provider Promo Start (Seg 0x3C) | SCTE-35, Provider Promo Start | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
| 505 | Provider Promo End (Seg 0x3D) | SCTE-35, Provider Promo End | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
| 506 | Distributor Promo Start (Seg 0x3E) | SCTE-35, Dist Promo Start | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
| 507 | Distributor Promo End (Seg 0x3F) | SCTE-35, Dist Promo End | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
| 508 | Alternate Content Opportunity Start (Seg 0x42) | SCTE-35, Alternate Content Start | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
| 509 | Alternate Content Opportunity End (Seg 0x43) | SCTE-35, Alternate Content End | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
| 510 | Provider Ad Block Start (Seg 0x44) | SCTE-35, Provider Ad Block Start | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
| 511 | Provider Ad Block End (Seg 0x45) | SCTE-35, Provider Ad Block End | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
| 512 | Distributor Ad Block Start (Seg 0x46) | SCTE-35, Dist Ad Block Start | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |
| 513 | Distributor Ad Block End (Seg 0x47) | SCTE-35, Dist Ad Block End | The event is triggered on the SCTE-35 signal ID, as defined in the protocol. |