License Upgrade

Configuration Backup

Although the system configuration will not change upon the license upgrade, it is mandatory to create a backup file of the configuration by exporting the complete configuration before the license upgrade.

Download Latest Files

• Login to TagVS Support Center and download the latest license file "License_vxxxx.rar".

Upload Software to Device

Online upgrade through GUI

For MCM-9000, version 5.1.2 onwards, follow the below steps to upload the device's latest files through the GUI.  

1. After the download, navigate to  System → System Information → Software Management → Upload License File (at the bottom).

2. Click on “Upload File” in the below screen to upload the downloaded RAR files (license) and then click on Submit to finish the upload.  

Online upgrade through FTP

1. Please follow the below steps to upload the latest files to the MCM-9000 through FTP. This procedure was tested with command-line FTP and FileZilla FTP client.

2. Extract the .rar file.

3. Navigate to the location of the downloaded files (software and firmware) through the CLI (command line "cd c:\location\").

4. Connect to the device by  "ftp <ip address of device>" with the user name "license" and password "tagvs" for License upgrades.

5. Upload all files to the default folder on the MCM-9000 device using the CLI (in the FTP's command line type: "put {Enter the Path to the file}").

 FTP usage in command line mode (windows) are listed below: 

Offline Upgrade

Follow the below steps to perform an offline upgrade:

1. Power down the unit, disconnect the flash drive from the server.

2. Connect the flash drive to a Windows/Linux PC.

3. Extract the .rar file.

4. Replace the "license.tag" file under "license" folder with the new file.

5. Reconnect the flash drive to the server.

6. Power up the server.