More

ID	*Name*	*Event Error*	*Description*
10	Configured Service Type Lower Than Effective (SD/HD/RADIO)	Config Service Type Mismatch	HD service detected while defined as SD (or SD instead of radio).
17	PSI CRC Error	CRC Error	PSI CRC error other than PAT, PMT, EIT, NIT, TDT detected on the table. It is triggered every time there is a CRC error on any of the tables.
181	Embedded Teletext Clock Error	Teletext Error	The embedded Teletext clock stopped. Teletext pages usually have a clock in the corner that is pushed by the Teletext generator and the updating of the pages. Disconnecting the Teletext generator from the encoder causes everything on the Teletext side to be stuck.
183	Non-Freezed Frame	Non-Freeze	This event is triggered when a non-freezed frame is detected where a freezed frame is expected.
256	Monitor Nielsen ID3 data	Nielsen ID3 received	This event is triggered if the information received is out of the OTT content or the transport stream on an additional PID. Only the content is taken and sent as extra data.
257	Monitor private ID3 data	Private ID3 received	This event is triggered if the information received is out of the OTT content or the transport stream on an additional PID. Only the content is taken and sent as extra data.
370	Timecode content error - either jumping or stopped	TimeCode Error	This event is triggered if the timecode is jumping or stopped. Jumping is going backward, and not incrementing and stopped is being stuck. A text caption specifies if it's jumping or stopped. It applies for timecode in both compressed and uncompressed content.
371	Timecode Missing	TimeCode Missing	This Event is triggered if there is no timecode for both types, jumping or stopped.
380	Teletext GPI-1	GPI 1	It is a standard that specifies how to send GPI-1 triggers on a Teletext content. Every time this event occurs, an alarm is triggered.
381	Teletext GPI-2	GPI 2	It is a standard that specifies how to send GPI-2 triggers on a Teletext content. Every time this event occurs, an alarm is triggered.
382	Teletext GPI-3	GPI 3	It is a standard that specifies how to send GPI-3 triggers on a Teletext content. Every time this event occurs, an alarm is triggered.
383	Teletext GPI-4	GPI 4	It is a standard that specifies how to send GPI-4 triggers on a Teletext content. Every time this event occurs, an alarm is triggered.
384	Teletext GPI-5	GPI 5	It is a standard that specifies how to send GPI-5 triggers on a Teletext content. Every time this event occurs, an alarm is triggered.
385	Teletext GPI-6	GPI 6	It is a standard that specifies how to send GPI-6 triggers on a Teletext content. Every time this event occurs, an alarm is triggered.
386	Teletext GPI-7	GPI 7	It is a standard that specifies how to send GPI-7 triggers on a Teletext content. Every time this event occurs, an alarm is triggered.
387	Teletext GPI-8	GPI 8	It is a standard that specifies how to send GPI-8 triggers on a Teletext content. Every time this event occurs, an alarm is triggered.
388	Teletext GPI state change	GPI Change	This event is triggered if any of the Teletext GPI events (1-8) are changed.
389	Teletext GPI Missing	GPI Missing	This event is triggered if any of the Teletext GPI events (1-8) doesn't exist.
999	Activated by User Snooze	Snooze	Snooze is activated by the user. Snooze disables the event for some time, and the snooze message on the mosaic is displayed.