Adding MCM9000 devices to MCS

Once the login is successful on the MCS device, you will land on the Dashboard page as shown below.

image-20240426-175425.png

 

 

  1. To add an MCM9000 device, click on the three-line icon highlighted in the left side pane and then on the devices.

image-20240522-104303.png

 

2. Click on add icon to add a new MCM9000 device that's on the same network as the MCS.

Fill in the URL/IP address of the MCM9000 device you need to add and along with the Username and Password and click on the save icon.

 

Only valid MCM9000 devices in the network are configurable. Click on the three lines icon highlighted in the left side pane and click on the Interfaces config.

 

 

The network interface is automatically visible under System → Interfaces config once the device is configured.

 

2. Once the device is added, click on the edit button or double click on the device to edit the configuration.

** Please note all the system configurations for MCM9000 devices added to MCS are made only through MCS.