WebRTC

Display Name

A user-defined name for caption display on the mosaic and system messages.

User Name/UUID

Unique username for the channel; used for SNMP traps and emails.

Access Type

Desired Type of channel source (WebRTC).

Publish Point URL

Publish point URL string in WebRTC. For example, if "https://janus.testStream.com?id=10" 

Please note, currently WebRTC Rx ingest is supported only using the Janus server as publish point. 

For Tx, please contact the TAG support and get the sample WebRTC client that is tailored to integrate with MCM WebRTC TX.

** From version 6.2.2 onwards MCM9000 supports, TURN server support for Amagi WebRTC. Publish point URL for TURN server is in the format : <url>&turn=user:password@<turn-ip>:<turn-port>

For example, https://janus.conf.meetecho.com/janus&turn=test:test123@52.73.92.16:3478

** From version 6.3.1 onwards MCM9000 supports Tx configuration, please refer to How to setup WebRTC Rx and Tx.

Stream URL Identifier

Not applicable for WebRTC.

Network

The NIC used to intercept the source.

Service Type

Service type settings (SD/HD/Radio, etc.); used for system resource allocation.

Service type refers to the number of hardware resources that should be allocated for monitoring the channel.

Service type is usually measured by SD point (0.5,1,5,10,20...) depending upon the required hardware allocation which is usually detected during the scan.

Tally Settings

Configure tally settings for a specific source.

Note

General notes about the channel.

**From version 5.7.0 onwards MCM9000 supports channels rotation at 90 or 270 degree, enabling potrait view. Please refer to Potrait view of a channel for detailed description. 

**From version 6.0.6 onwards MCM9000 supports #SLIDE# option in the "Note" field for sources that has frame interval greater than 2 seconds.