Version 6.0 onwards MCM9000 supports, TR-07 and TR-08 code type.
...
| Fields | Description |
| Common | |
Name | SDT channel name for the created mosaic. |
User Name / UUID | Unique username ID for the channel. |
Enabled | Double click on the toggle switch. When enabled ( |
Frame Rate | Frame rate reduction mode for low bandwidth transmission. Note: when the mosaic frame rate is reduced to less than standard, the layout cycle feature is disabled. |
Resolution | Specifies the output mosaic resolution for compressed sources; the chosen resolution should match the layout resolution. |
| Clock Offset (sec) | Clock offset adjust clocks on mosaic. It range between 0 to 3600 sec. |
Interlacing | When checked ( *Relevant for compressed sources. For uncompressed, please choose from the dropdown in "SDI over IP format". *Please note the MPTS output might appear as progressive even though it's actually interlaced on the Source Statistics. |
| Compressed | |
Codec Type | Mosaic stream codec type for compressed sources. (Mpeg2, H.264, H.265 LQ, H.265 HQ, H.264 HQ). *Please refer to the appendix Output Stream Specifications for the supported types. |
| Compressed Video Bitrate (Mbps) | Specify the encoded mosaic bitrate; range: 0.5 to 30 (in Mbps). |
VBV Limit (Mbps) | Specify the value in Mbps or use auto settings (auto settings are highly recommended). |
GOP Size | Encoded stream max GOP size: 24 or 50. |
GOP Size Mode | Select the GOP size mode (Static or Dynamic). Static: Constant; configured GOP size is fixed. |
| HEVC Latency Mode | *MCS Version 1.1.3 onwards compitible with MCM9000 6.3.4 supports low latency mode. Low latency mode (Low, Regular, Ultra Low) is supported for SRT/Zixi. |
Deblocking | Deblocking toggle switch; relevant for H.264 only. |
Downscale 4K on compressed stream | When checked ( For example, for a higher frame rate (e.g., 50fps) and 4K resolution (e.g., 3840x2160), one can choose to downscale 4K to 1080 resolution by checking this box. |
Downrate 50/59.94/60 | When checked, it downrates the higher frame rate to half of the specified rate. For example, for a higher frame rate (e.g., 50fps) and 4K resolution (e.g., 3840x2160), one can choose to downrate the frame rate to 25fps by checking this box. |
| Uncompressed | |
Linear Codec Type | Mosaic stream codec type for uncompressed sources. (2022-6, 2110-20). Version 6.0 onwards MCM9000 supports, TR-07 and TR-08 code type. Uncompressed cant be sent in parallel if we choose JXS. It is selected instead of 2110 and 2022-6. TR-08 is based on 2110, that acts like a carrier (RTP-2110), TR 07 is MPEG-TS based. In both cases it’s the same compression. *Please refer to the appendix Output Stream Specifications for the supported types. |
| JXS Video Bitrate (Mbps) | Version 6.0 onwards MCM9000 supports, JXS Video Bitrate. In automatic mode, 300Mbps for HD (60 frames) 150Mbps (25 and 30 frames) For UHD 600Mbps for lower bit rate and 1.2 Giga bit for high frame rate. Interlaced works only on 25fps. |
SDI over IP format | The following standards are available for uncompressed sources.
|
Uncompressed Latency Settings | Select the latency settings from the dropdown. The default is Regular (5). |
| Disable C Bit | |
| Pad 2110 Audio | |
Audio Meter Display | Select the desired audio meter display standard (PPM or EBU). |
Display Alarms | When checked, it displays alarms on the output mosaic. **Please note enabling alarms adds an animate pixel at the bottom of the mosaic. |
Behavior on Input Loss | Select the behavior on Input loss that needs to be displayed on the mosaic from the dropdown list (Icon, Dark Freeze + Icon, Freeze + Icon, or Freeze). For example, if the channel is down, the mosaic displays a Freeze + Icon. |
...