PMT

ID	Name	Event Error	Description
11	PMT Is Scrambled	PMT Scrambled	The packet header scrambling flag is marked as scrambled – for the PMT table. The PMT table is not supposed to be scrambled. If the scrambling flag on the PMT table is set to on, it triggers an alarm.
12	PMT Not Found	PMT Not Found	PMT, not found; either PID is missing, or the table was not found in the PID.
13	PMT Repetition Rate Too Slow	PMT Repetition Too Slow	PMT repetition rate is too slow; the threshold is configurable. The default value is 0.5 sec.; an alarm is triggered when the threshold is less than the PMT repetition rate.
15	Referred PID not Found (zero bitrate PID)	Zero BR PID	If the PID described on the PMT table does not exist on the Transport Stream (zero bitrate PID), this event is triggered.
25	PCR PID Mismatch	PCR not on the expected PID	If the actual PCR PID discovered during the scan does not match the PMT table information, this event is triggered.
57	PMT CRC Change(Monitor changes to PMT CRC)	PMT CRC Changed	The CRC for the PMT table changed without version change of the PMT Table.
65	PMT Version Change	PMT Version Changed	The PMT version was changed. Whenever the content of the PMT table changes, the CRC of the table changes as well, and the version number of the table is incremented. This event is not an error.
67	PMT Table ID Error	PMT table ID Error	The PMT table ID field is not correct. This event is triggered if a wrong table ID is received for PMT PID.
76	PMT Is Illegal	PMT Illegal	Illegal values or length on PMT. This event is triggered if the structure of the PMT is illegal. For example, certain forbidden markers on the header are present.
88	PMT Bitrate, Max Threshold	PMT Bitrate above Max	Detected PMT bitrate is greater than the configured maximum threshold.
89	PMT Bitrate, Min Threshold	PMT Bitrate below Min	Detected PMT bitrate is smaller than the configured minimum threshold.
92	Missing PIDs on PMT	Missing PID	PIDs that are configured in the channel configuration is not found in the PMT table.
93	Extra PIDs on PMT	Extra PIDs on the PMT table	The PMT table refers to PIDs which were not configured in the channel configuration.
142	Multiple PID Entries on PMT	PMT Multi PID	The PMT table includes more than one definition for the same PID. For example, PID 2000 is defined for both audio and for subtitle.
144	Payload changed	PID payload changed on PMT (or Descriptor error)	The PID payload type does not match the configuration. For example, there is a video instead of audio in the PID, or vice versa.
198	PMT Components Descriptors Error	PMT Descriptors Error	The component description does not match the content type. Each descriptor has a type and length. If its length does not match the length of the descriptor structure, this event is triggered. Only descriptors shown in the GUI are verified.
199	Multiple Component Descriptors on PMT	PMT Multi Descriptors	Multiple definitions for the same descriptor PID. For example, PID 2001 is defined for English subtitles descriptors as well as Spanish.