Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Configuration Backup

Although the system configuration will not change upon the license upgrade, it is mandatory to create a backup file of the configuration by exporting the complete configuration before the license upgrade.

Download Latest Files

Upload Software to Device

Online upgrade through GUI

For MCM-9000, version 5.1.2 onwards, follow the below steps to upload the device's latest files through the GUI.  

 

  1. After the download, navigate to  System → System Information → Software Management → Upload License File (at the bottom).

  2. Click on “Upload File” in the below screen to upload the downloaded RAR files (license) and then click on Submit to finish the upload.  

Online upgrade through FTP

  1. Please follow the below steps to upload the latest files to the MCM-9000 through FTP. This procedure was tested with command-line FTP and FileZilla FTP client.

  2. Extract the .rar file.

  3. Navigate to the location of the downloaded files (software and firmware) through the CLI (command line "cd c:\location\").

  4. Connect to the device by  "ftp <ip address of device>" with the user name "license" and password "tagvs" for License upgrades.

  5. Upload all files to the default folder on the MCM-9000 device using the CLI (in the FTP's command line type: "put {Enter the Path to the file}").

 FTP usage in command line mode (windows) are listed below: 

Commands

Description

 cd c:\location\

Change to the location of the new software file.

 ftp 192.168.0.111

Connect to the IP of the running system.

 license

Enter the connection username.

 tagvs

Enter the connection password.

 put license.tag

Push the new software file.

 quit

Disconnect.

Offline Upgrade

Follow the below steps to perform an offline upgrade:

  1. Power down the unit, disconnect the flash drive from the server.

  2. Connect the flash drive to a Windows/Linux PC.

  3. Extract the .rar file.

  4. Replace the "license.tag" file under "license" folder with the new file.

  5. Reconnect the flash drive to the server.

  6. Power up the server.

Soft Reset after upgrade

Please make sure to do a “Soft reset“ under System → System Information → Device Controls after upgrade for the changes to reflect.

  • No labels