In order to change the TAG logo on the mosaic output into a customized one, you need to download the mcm_icons.rar file from the support zone password: TAGVSicon (The mcm_icons package is for file name reference). The file contains the default icons used in the MCM-9000.
Connect to your MCM-9000 with the FTP using your management IP address and use the following credentials :
Username: icons
Password: tagvs
Upload your JPG file into the FTP folder.
Using a JPG box type from the layout editor, you edit the box and put a URL as below:
logo01.jpg
If you want a spinning logo, you can use a sequence of JPGs as below:
logo[00..90].jpg
If you put several independent JPGs and want a slower replacement, you can use the "rate" option as follows:
logo[00..03].jpg;rate=5
where "rate" is a multiplier, so "1" is regular and any number is slower.
You can also use the "update" option if hot updates needed to be done:
logo.jpg;update=20
where the number represents the number of seconds between each reload.
Note: The default Logo should have a size of 256x160 (WxH). However, the error and warning images that appear on the tiles are required to be 128x128 (WxH).
Please refer to How to send jpeg images to MCM9000 through WinSCP to replace other jpeg images or icons.