In WebRTC, the media data is sent directly from one browser to another without going through an intermediary server. It reduces latency and enables real-time communication. To scan a WebRTC source, once you click on add WebRTC, the below screen is displayed.
...
To initiate the scan, click Submit after specifying the relevant details.
| Fields | Description |
|---|---|
Scan These are the mandatory fields and are displayed in the Scan Channels GUI. | |
Network | Logical network name, as configured under Network. |
Device | Monitoring device name. |
Access Type | Selected channel Scan Source (WebRTC). |
Name Template Template for naming the channel source. Click on the Append or Override button to append or override an existing name. | |
Default Template | Default templates available are:
|
Sources All the details specified in the Add Range and Name Template are listed here. One can also set the below fields manually. Suppose there is a list of Sources with the below details that need to be added. Copy the details (ctrl+c) and click on the Sources table to paste (ctrl+v). | |
Name | Input the source channel's desired name manually or append the name from the Default Template. |
IP Address/URL | Input a valid IP address or URL of the NDI WebRTC source channel manually, or the IP address specified in the Add Range table is displayed. *For example, if "https://janus.testStream.com/stream1". Please note, currently WebRTC Rx ingest is supported only using the Janus server as publish point. For Tx, please contact the TAG support and get the sample WebRTC client that is tailored to integrate with MCM WebRTC TX. ** From version 6.2.2 onwards MCM9000 supports, TURN server support for Amagi WebRTC. Publish point URL for TURN server is in the format : <url>&turn=user:password@<turn-ip>:<turn-port> For example, https://janus.conf.meetecho.com/janus&turn=test:test123@52.73.92.16:3478 ** From version 6.3.1 onwards MCM9000 supports Tx configuration, please refer to How to setup WebRTC Rx and Tx. |
Note: To initiate the scan, click Submit. The number of found channels will be displayed on the Status column in the Scan Channels GUI on completing the scan. All new channels will be visible in gray on the Sources Configuration table.
Any existing channel rescanned will be assigned the Scanned profile in gray. To use these profile definitions later, go to the channel's profile, click the Scanned profile and rename it. See Profiles for more information.