Status

Network → Status

The Network Status displays the status of the Network Interfaces derived from the hardware and configuration. When set to DHCP mode, the IP Address, Default Gateway, and Network Mask data are assigned by the local Router. The Network Status has the below fields.

Fields	Description
Name	It is the Name of the logical Network, and it is unique for each NIC.
Interface ID	It is the physical ID of the Interface (eth0, eth1, etc.).
Device	The Device's name.
MAC	The Device's MAC address.
Speed	Network Speed (in Mbps).
Mode	Static IP or DHCP.
IP Address	IP Address of the Network.
Network Mask	Network Mask of the Network.
Default Gateway	Default Gateway of the Network.
Flow Control	Ethernet Flow Control settings (Auto, Enabled, or Disabled).
LLDP Port ID	The Link Layer Discovery Protocol (LLDP) allows the device to advertise its device information to its directly connected neighbors. Displays the LLDP interface ID.
LLDP System	Displays the LLDP switch/system information.
SFP Info	Displays the small form-factor pluggable (SFP) information.
Interface Status	Displays the Interface Status. *Green and Up status indicates that the network interface is connected, while Red and Down status implies that the network is not connected.