How to configure NMOS on MCS

Owned by Ramya Raman (Unlicensed)
Last updated: Jul 28, 2024
2 min read

NMOS is a control protocol for the uncompressed-2110 (mainly) content.

NMOS 4 - registry: This service is only for the detection and registry of current configurations and devices.

NMOS 5 - control: Configure active receivers/senders.

With NMOS 5, the MCM is an HTTP server. On MCM, define port (currently 950). The MCM listens to the activation commands for both receivers and senders.

A test for NMOS broadcasting receivers is HTTP://{IP Adress}:950/x-NMOS/node/1.0/receivers web browser test.

GUI configuration

Please follow the steps below to configure the NMOS settings through GUI when you don’t have an mDNS.

  1. On the MCS GUI, Navigate to System → Interfaces Config. Click on edit and enable the NMOS button and click on save.

 

2. Please navigate to System → Devices. Click on edit, under the Global NMOS Settings field specify the Registry Server Host and Query API Port in the format : registry=<ip_address>:<port>,query=<query port>. Disable/enable Verify Entry After Set. For example, registry=1.1.1.1:1111,query=2222,verify.

**Please note, query is optional and if it is not defined it’s considered noverify.

**registry can also be specified as reg=<ip_address>:<port>.

Click on the submit button.

 

 

Source configuration

Please ensure to follow the below steps in case the device is not recognized in NMOS controller.

  1. In the Source Configuration → Recievers, the right network interface is selected for the main and secondary NIC.

 

2. In the Source Configuration → Profiles the required 2110 Audio and Video.

 

Please note, all the Audio and Video are displayed individually when viewed on NMOS controller.