Stream
The stream table consists of Events and thresholds associated with the DVB Transport Stream.
ID | Name | Event Error | Description |
1 | No Input Stream | No Input Stream | No TS is available on the configured multicast/unicast address. The device sends a new IGMP-Join message every ~3 seconds. |
2 | TS Sync Lost | TS Sync Lost | 0x47 symbol missing from the beginning of 2 consecutive packets at least. |
3 | Sync Byte Error | Sync Byte Error | 0x47 symbol missing from a single packet. |
7 | Network Fault | Network Fault | Network error is detected (could be related to the network interface, cabling, or switch). |
16 | TS Error Indicator | TS Error Indicator | The TS error indicator flags are marked in the received packet. The threshold is in occurrences per second. (1...1000). |
83 | Monitor Source IP/Port Changing | Source IP Changed | The change detected in the IP or port from which the stream is originated (relevant only for multicast streams). |
96 | Verify TSID Match | TS ID Mismatch | Detected TS ID does not match the channel's configured TS ID. |
97 | Single PID CC Error | CC Error on PID | CC (Continuity Count) error is detected on a single PID. The message includes the relevant PID number. In the case of "Stream CC", this event will be masked. The threshold is in occurrences per second (1..1000). |
98 | Stream CC Error | Stream CC error | CC (Continuity Count) error detected on multiple PIDs both on the selected service and off the service (spread CC Error). The threshold is in occurrences per second (1..1000). |
109 | TS Bitrate Change Threshold | TS Bitrate | Bitrate change of the complete MPTS. |
120 | Detect VBR Transport Stream | Transport Stream is VBR | Source transport is not null padded and does not have a constant bitrate. The test is disabled for non-null padded SPTS sources. |
121 | Detect PCR Clock Drift | PCR Clock Drift | Inaccurate stream clock detected. Units are 1ms drift per second (0.1% units). |
178 | Detect PCR Clock Jitter | PCR Jitter | PCR clock jitter. |
182 | Minimal NULL Packet Interval | Null Interval | No null packets detected within the defined configuration. |
254 | High inter-arrival time max value | High IAT | High inter-Arrival Time (IAT) - the max value of the IAT is above the threshold. |