Stream Configuration

The GUI of Stream Configuration from version 5.6.0 onwards has two tabs Main streams and Auxillary streams for stream configuration. It supports CDI, NDI and SRT configurations.

The Stream Configuration has the below fields.

Fields	Description
MPEG-TS has a Main and Backup stream configuration with the below fields.
IP Address	MC (multicast)/UC (unicast) IP address of the mosaic stream.
Port	Port number of the mosaic stream.
TTL	Time to live settings for network multicast.
Network	Network interface ID.
Enabled	When checked, it enables the MPEG-TS stream.
Main Uncompressed has a Video and Audio stream configuration with the below fields.
IP Address	MC (multicast)/UC (unicast) IP address of the mosaic stream.
Port	Port number of the mosaic stream.
TTL	Time to live settings for network multicast.
Network	Network interface ID.
Enabled	When checked, it enables the main Uncompressed stream.
Secondary Uncompressed is a backup of Main Uncompressed.
IP Address	MC (multicast)/UC (unicast) IP address of the mosaic stream.
Port	Port number of the mosaic stream.
TTL	Time to live settings for network multicast.
Network	Network interface ID.
Enabled	When checked, it enables the Uncompressed secondary stream.
HLS Publish Point
Url	Specify the HLS (FTP, S3 or http) publish point URL for the HLS output stream to be saved. Version 6.3.10 onwards the HLS publish point URL can be specified in 3 modes, “naming_by_id”** is the same as not specifying anything and works as before (serial+encoder id). For example, ftp://user:password@10.0.0.111/mcm?naming_by_id *”naming_by_uuid”* uses the encoder uuid (names are “enc_uuid....”). For example, ftp://user:password@10.0.0.111/mcm?naming_by_uuid ”naming=xxxx” is a custom name (the files/folders will be “enc_xxxx….”). For example, ftp://user:password@10.0.0.111/mcm?naming=testing The above is also applicable for FTP/HTTP/S3.
Network	Network interface ID.
Enabled	When checked, it enables the HLS stream.
Zixi Publish Point *From version 5.6 onwards Zixi and SRT publish points are configured in this section.
Url	Specify the Zixi publish point URL: zixi://<zixi_IP>/<Stream_ID> (for example: zixi://108.129.11.46/streamtest.ts). Please note, if the Zixi sources are encrypted with passwords, the Zixi URL is of the format, zixi://<Password>@<zixi_IP>:<port>/<Stream_ID> From version 5.6 onwards SRT is supported and you can specify a valid SRT publish point: srt://<IP>:<port>/StreamName?mode=listener&maxconn=4&passphrase=secret*
Network	Network interface ID.
Enabled	When checked, it enables the Zixi stream. *From version 5.6 onwards SRT is supported
CDI Publish Point *Available from version 5.6 onwards
Url	Specify the CDI publish point URL.
Network	Network interface ID.
Enabled	When checked, it enables the CDI stream.
NDI Publish Point *Available from version 5.6 onwards
Url	Specify the NDI publish point URL.
Network	Network interface ID.
Enabled	When checked, it enables the NDI stream.